How to Electric Start a Snowblower

How to Electric Start a Snowblower?

Your home is freezing due to the cold temperature and snowy outside, but you are enjoying sitting near the fire. But, it does not work because your driveways and pathways are full of snow and you are thinking about how to electric start a snowblower.

This guide will show you how to use the electric start on your snowblower, so you can quickly clear your driveway without too much effort. Just Start a Snowblower and remove snow from your driveways and pathways easily. Lets Start;

What does Electric Start mean on a Snowblower?

There are two ways to start a snowblower, one is to use the cord and pull it with your hands. Alternatively, you can use an electric snowblower starter. What does it mean?

An electric start means a snowblower contains an electric motor and battery to start the engine. This is useful because to pull the cord several times, you just push the button and your snowblower starts

Here are some benefits of electric starting on snowblowers:

  • You don’t have to pull a cord, making it easier for people who might have trouble with strength or hand coordination.
  • It’s faster and more convenient, especially when it’s cold and pulling is hard.
  • It helps prevent injuries to your back or shoulders from pulling the cord repeatedly.

Starting a snowblower using the electric option is easier and more hassle-free and you can enjoy the ease if your snowblower has this amazing feature.

Do Electric Start Snow Blowers have a Battery?

There are two types of electric start options, and not all electric start snowblowers come with a battery option:

In the first type, You are directly connecting your snowblower to the electricity; typically, 120 volts may vary according to the country. When you press the start button, it can directly start using the electric power through the wire.

On the other hand, Battery-powered Electric Start systems use a rechargeable battery to power the electric motor that starts the engine. These batteries are usually charged using a dedicated charger that comes with the snow blower. This system allows for cordless operation, eliminating the need for an outlet nearby when starting the snow blower.

It is important to distinguish between these two electric start types by consulting the snow blower’s manual or product information to ascertain whether a particular snow blower requires a battery.

How to Electric Start a Snowblower?

It is easy to start your snowblower, whether it’s an AC electric start or a battery-powered electric start model. Before starting, your snowblower is on a flat surface, and the chute is away from you and others. Safe starting is important and in AC electric starts to be more careful about shock and other accidents. For this purpose, always try to start the snowblower in a dry place where there is no water on the surface. Here is the step-by-step guide:

Fuel Up and Oil Check:

Fill the fuel tank with winterized gas suitable for your engine. Make sure the engine oil level is correct.

For AC Electric Start:

Plug the electric starter cord into a grounded outlet with the right voltage.

For Battery-powered Electric Start:

Ensure the battery is adequately charged. Look for an indicator light on most models to check battery level. Charge the battery using the provided charger if necessary.

Starting the Engine:

Before starting the engine of your electric snowblower, follow these steps for proper preparation. Firstly, insert the key into the ignition and turn it to either the “on” or “run” position, ensuring that the engine is ready to start.

Next, adjust the throttle control to a low or medium setting, controlling the engine’s speed during operation.

For cold starts, engage the choke by turning it fully towards the “choke” position, which helps in providing the engine with the right fuel-air mixture. However, if you’re starting the snowblower in warmer conditions, consult your manual for specific instructions regarding the choke settings.

Additionally, certain models might require priming before starting. To do this, press the primer bulb a few times to ensure the carburetor is filled with fuel, aiding in smoother engine ignition.

Following these steps ensures that your snowblower is properly prepared for starting, promoting efficient operation during snow clearing tasks.

Push to Start:

When using the AC Electric Start feature on your snowblower, you simply need to press the start button firmly for a maximum of 5 seconds. This action activates the electric motor, which then cranks the engine to start. If the engine doesn’t start immediately, release the button and repeat the process, ensuring not to over-crank to avoid straining the system.

On the other hand, if your snowblower has a Battery-powered Electric Start, the process is slightly different. You’ll press and hold the start button until the engine starts running smoothly, then release the button. This action engages the battery-powered electric motor to crank the engine until it starts, providing a hands-free starting experience. This method is convenient and efficient, allowing you to focus on other tasks while the snowblower starts up.

(Once Started)Choke Off:

When your snowblower warms up, you should slowly adjust the choke to ensure smooth operation. For this, you can move the choke (knob) to the “run” position gradually. By doing this, your snowblower is ready for normal operation and fuel consumption is also low.

You can also read the user manual of your snowblower to get accurate information about the choke settings because this setting varies according to the model and company.

Clear the Way:

Once your engine is completely warm-up and starts normally, it is not time to clear the snow For this, you follow these steps:

In the first step, adjust the chute direction to control where the snow will be thrown. You can change the angle by moving the lever or rotating the crank.

Then, if your snowblower is equipped with an auger lever, raise it to engage the auger, which is used to gather and throw the snow.

After adjusting the chute direction Start removing and throwing the snow from your driveways and pathways effectively.

Additional Tips:

  • If the engine doesn’t start, refer to the manual or seek professional assistance.
  • For AC electric start, unplug the power cord before operating the snowblower.
  • Store the battery in a warm place during long periods of non-use for optimal performance.
  • Always follow safety guidelines outlined in the manual.
  • By following these steps and consulting your manual, you can effectively use your snowblower’s electric start to tackle winter snowfall with ease.

If Snow Blower Electric start is not working?

If your snowblower’s electric start isn’t working, follow these steps:

  • Ensure proper safety measures are in place.
  • Consult the manual for specific troubleshooting steps.
  • Check fuel, oil, and power connections.
  • Troubleshoot based on AC or battery-powered start.
  • If basic checks fail, inspect components like the starter switch, solenoid, or motor.
  • Exercise caution with electrical work and seek professional help if needed.


Electric start snowblowers are easy to use. Nowadays, every company is providing the electric start feature in their snowblower models.

You can utilize this feature perfectly by simply following a few safety tips and understanding the basic phenomenon. By reading this you are not only able to start your snowblower but also able to troubleshoot if you face any starting problems.

Naveed Aanjum author

About Naveed A Hashmi

In my childhood, I used to see my parents while working in the land, for these reasons today I have been serving the same as our own tradition and culture. I thus love to stay in it, because I want to learn something advanced and new so that I may improve my farm’s contour and help others with my experience.

Similar Posts